Microcomputed-Tomographic Analysis of the Root Canal Morphology of the Mandibular First Molars in a Malaysian Subpopulation Using Two Classification Systems / Análisis por Tomografía Microcomputada de la Morfología del Conducto Radicular de los Primeros Molares Mandibulares en una Subpoblación de Malasia Utilizando dos Sistemas de Clasificación

SUMMARY: This work investigated the morphology of the root canal system of the mandibular first molar in a Malaysian subpopulation. Using micro-computed tomography with an isotropic resolution of 22 µm, 140 mandibular first molars were scanned. MIMICS software was used for segmentation, 3-D reconstruction and analysis of the acquired images. The canal configuration was described using Vertucci [supported by the supplementary configurations proposed by Sert & Bayirli (2004)] and Ahmed et al. (2027), coding systems. The chi-square test was used to assess the association between qualitative variables. By non-considering intercanal communications, Vertucci types IV (17.1%) and I (76.4%) were the most frequently reported configurations in the mesial and distal roots, respectively. Of the reported configurations, 24.3% and 4.3% were non-classifiable by Vertucci system in the mesial and distal roots, respectively. Up to 63.6% and 9.3% of the reported configurations were non- classifiable, and type I was the most frequent when considering intercanal communications (7.1% and 76.4% in the mesial and distal roots, respectively). According to Ahmed et al., system, almost half of the sample had more than four digits (47.9%), followed by the 3-digits category (20.71%). In both systems, a significant association was found between the canal configuration and the root type (p<0.001). The mandibular first molar of this Malaysian subpopulation demonstrated a wide range of root canal morphology. When compared to the Vertucci system, the system developed by Ahmed et al., successfully classified all molars configurations despite their level of complexity. The complex canal anatomy of mandibular first molars in this subpopulation warrants special attention during root canal treatment procedures.

En este trabajo se investigó la morfología del sistema de conductos radiculares del primer molar mandibular en una subpoblación de Malasia. Utilizando tomografía microcomputada con una resolución isotrópica de 22 µm, se escanearon 140 primeros molares mandibulares. Se utilizó el software MIMICS para segmentar (enmascarar), reconstruir en 3D, visualizar y analizar las imágenes adquiridas. La configuración del canal se describió utilizando Vertucci respaldado por las configuraciones complementarias propuestas por Sert & Bayirli (2004)] y Ahmed et al. (2017, 2020), sistemas de codificación. Se utilizó la prueba de chi-cuadrado para evaluar la asociación entre variables cualitativas. Sin considerar las comunicaciones intercanales, los tipos Vertucci IV (17,1%) y I (76,4%) fueron las configuraciones reportadas con mayor frecuencia en las raíces mesiales y distales, respectivamente. De las configuraciones reportadas, el 24,3 % y el 4,3 % fueron no clasificables por el sistema de Vertucci en las raíces mesial y distal, respectivamente. Hasta el 63,6 % y el 9,3 % de las configuraciones reportadas fueron no clasificables, siendo la tipo I la más frecuente al considerar las comunicaciones intercanales (7,1 % y 76,4 % en las raíces mesiales y distales, respectivamente). Según Ahmed et al. (2017, 2020) en el sistema, casi la mitad de la muestra tenía más de cuatro dígitos (47,9 %), seguido por la categoría de 3 dígitos (20,71 %). En ambos sistemas se encontró una asociación significativa entre la configuración del canal y el tipo de raíz (p<0,001). El primer molar mandibular de esta subpoblación de Malasia demostró una amplia gama morfológica del conducto radicular. En comparación con el sistema Vertucci, el sistema desarrollado por Ahmed et al. (2017, 2020) clasificaron con éxito todas las configuraciones de los molares a pesar de su nivel de complejidad. La compleja anatomía del canal de los primeros molares mandibulares en esta subpoblación merece una atención especial durante los procedimientos de tratamiento de conducto.

Segundo Conducto Mesiovestibular en Molares Superiores: Prevalencia y Análisis Anatómico Mediante Tomografía Computarizada de Haz Cónico / Second Mesiobuccal Canal in Maxillary Molars: Prevalence and Anatomical Analysis Through Cone Beam Computed Tomography

El objetivo de este estudio fue utilizar la Tomografía Computarizada de Haz Cónico (TCHC) para investigar la configuración anatómica, prevalencia y distribución del conducto mesiovestibular Dos (MV2) en molares superiores de una subpoblación chilena, considerando variables como la presencia del conducto MV2, la clasificación de Vertucci, el género y edad. Estudio observacional de corte transversal. La muestra consistió en Tomografías Computarizadas de Haz Cónico tomadas en la clínica odontológica de la Universidad Andrés Bello (Viña del Mar). Se calculó el tamaño muestral utilizando la fórmula de población conocida, lo que resultó en 262 tomografías. Los examinadores se calibraron utilizando el coeficiente Kappa de Cohen, para luego analizar las variables mediante un estudio imagenológico utilizando el software I-CAT Visión. Se analizaron 439 primeros y segundos molares superiores. La prevalencia del conducto MV2 en primeros molares fue del 63,74 %, mientras que, en segundos molares, fue del 20,04 %. La prevalencia en primeros molares fue mayor en hombres (73,86 %) que en mujeres (58,62 %), mientras que, en segundos molares, fue del 15,81 % en mujeres y del 28,41 % en hombres. En relación con la edad, en los primeros molares la diferencia fue significativa en el rango de 18 a 40 años (66,49 %). En cuanto al tipo de configuración según Vertucci (2005), el 70 % de los primeros molares presentó una configuración Tipo II, y un 23,65 % Tipo IV, con resultados similares en los segundos molares. El presente estudio demostró que los conductos MV2 son frecuentes en la población analizada, especialmente en los primeros molares, y que la configuración Tipo II es la más prevalente. Además, se observó una mayor prevalencia en hombres y en el rango de 18 a 40 años. Estos hallazgos proporcionan información relevante sobre la anatomía radicular en la población y pueden contribuir a mejorar los resultados de tratamiento.

SUMMARY: The aim of this study was to use Cone-beam Computed Tomography (TCHC) to investigate the anatomical configuration, prevalence, and distribution of the Second Mesiobuccal (MB2) canal in upper molars of a Chilean subpopulation, considering variables such as the presence of MB2 canal, Vertucci classification, gender, and age. Cross-sectional observational study. The sample consisted of TCHC scans taken at the dental clinic of Universidad Andrés Bello (Viña del Mar). The sample size was calculated using the formula for known population, resulting in 262 scans. The examiners were calibrated using Cohen's Kappa coefficient, then the variables were analyzed through an imaging study using I-CAT Vision software. 439 first and second upper molars were analyzed. The prevalence of MB2 canal in first molars was 63.74 %, while in second molars, it was 20.04 %. The prevalence in first molars was higher in males (73.86 %) than in females (58.62 %), while in second molars, it was 15.81 % in females and 28.41 % in males. Regarding age, in first molars the difference was significant between the age range of 18 to 40 years (66.49 %). Regarding the type of configuration according to Vertucci, 70 % of the first molars had Type II configuration, and 23.65 % had Type IV, with similar results in second molars. The present study demonstrated that MB2 canals are frequent in the analyzed population, especially in first molars, and Type II configuration is the most prevalent. Additionally, a higher prevalence was observed in males and in the age range of 18 to 40 years. These findings provide relevant information about root anatomy in the studied population and can contribute to improving treatment outcomes.

Analysis of the Internal and External Morphology of the Mandibular First Molar in a Chilean Sub-Population Using Cone-Beam Computed Tomography / Análisis de la Morfología Interna y Externa del Primer Molar Mandibular en una Subpoblación Chilena Mediante Tomografía Computarizada de Haz Cónico

SUMMARY: The mandibular first molar (MFM) commonly presents two roots with two canals in the mesial root and one or two canals in the distal root. However, morphological variations have been described in different populations, which must be considered when planning endodontic treatment. The aim of this study was to analyze the internal and external morphology of the MFM in a Chilean sub-population using cone-beam computed tomography (CBCT) images. An in vivo cross-sectional, descriptive, and observational study was conducted using CBCT exams from 351 right and left MFM. The data were analyzed by descriptive statistics using the Chi- Square test for categorical variables, Fisher's exact test, the Mann-Whitney U non-parametric test for two independent samples, and the Wilcoxon non-parametric test for related samples. Of the total sample, 1 root was observed in 2.27 % of the cases, 2 roots in 93.73 %, and 3 roots in 4 %. In relation to the number of canals, 71.23 % of the MFM showed 3 root canals, 16.81 % 4 canals, 9.69 % 2 canals, and 2.28 % 1 canal. Of all the studied cases, 2.3 % had a C-shaped anatomy. In terms of morphology, using Zhang's classification, variant 3 was observed in 71.23 %, variant 4 in 12.82 %, variant 1 in 9.67 %, variant 6 in 4 %, and variant 8 in 2.28 %. In conclusion, the morphology of the MFM is variable in a Chilean sub-population, and these variations must be considered before and during endodontic therapy. CBCT proved to be an effective tool for the in vivo study of tooth morphology.

El primer molar mandibular (MFM) comúnmente presenta dos raíces con dos canales en la raíz mesial y uno o dos canales en la raíz distal. Sin embargo, se han descrito variaciones morfológicas en distintas poblaciones, las que se deben tener en consideración al momento de planificar el tratamiento endodóntico. El objetivo de este estudio fue analizar la morfología interna y externa del MFM en una sub población chilena mediante el uso de imágenes de tomografía computarizada Cone Beam (CBCT). Se realizó un estudio transversal, descriptivo y observacional in vivo empleando exámenes CBCT de 351 MFM tanto derechos como izquierdos. Los datos se analizaron mediante estadística descriptiva empleando la prueba Chi-Cuadrado para variables categóricas, el test exacto de Fisher, la prueba no paramétrica de U-Mann-Whitney para dos muestras independientes y la prueba no paramétrica de Wilcoxon para muestras relacionadas. Del total de la muestra se observó 1 raíz en un 2.27 % de los casos, 2 raíces en 93.73 % y 3 raíces en un 4 %. En relación al número de canales un 71.23 % de los MFM mostraron 3 canales radiculares, un 16.81 % 4 canales, un 9.69 % 2 canales y un 2.28 % 1 canal. Del total de los casos estudiados un 2.3 % se presentó anatomía en forma de C. En relación a la morfología, empleando la clasificación de Zhang, se observó en un 71.23 % la variante tipo 3, en un 12.82 % la variante tipo 4, en un 9.67 % la variante tipo 1, en un 4 % variante tipo 6 y en un 2,28 % variante tipo 8. En conclusión, la morfología del MFM es variable en una subpoblación chilena y estas variaciones deben ser consideradas antes y durante la terapia endodóntica. El CBCT demostró ser una herramienta eficaz para el estudio in vivo de la morfología dentaria.

Avaliação da profundidade da cárie proximal nos exames radiográfico convencional e digitalizado / Evaluation of the size of proximal caries in radiography and digitized

Introdução: A cárie dentária é uma doença multifatorial que compreende vários fatores biológicos e sociais. A superfície proximal dos dentes é uma região de difícil visualização que pode esconder pequenas lesões cariosas no esmalte dentário, impossibilitando o diagnóstico através de inspeções visuais e táteis. Objetivo: O objetivo deste trabalho foi avaliar a profundidade da cárie proximal nos exames radiográficos convencionais e digitais, comparando as profundidades das lesões consideradas nestes exames às do exame histológico. Método: Foram utilizados exames radiográficos interproximais de 40 dentes humanos, 20 pré-molares e 20 molares, com alterações clínicas em uma das superfícies proximais, como lesões de mancha branca ou acastanhada e pequenas cavitações. Três profissionais especializados em radiologia odontológica com mais de cinco anos de experiência clínica mediram a profundidade das lesões pelos exames radiográfico e digital das amostras. Para obter os resultados, utilizou-se a técnica de análise de variância (ANOVA). Resultados: Constatou-se um nível de significância de 5% nas mensurações dos exames radiográficos convencionais e digitalizados, mostrando a fidelidade das imagens radiográficas em relação a real profundidade da lesão. Conclusão: Conclui-se que os exames de imagem avaliados foram eficientes na determinação da profundidade das lesões de cárie proximal.

Introduction: Dental caries is a multifactorial disease that comprises several biological and social factors. The proximal surface of the teeth is a region of difficult visualization that can hide small carious lesions in the dental enamel, making diagnosis through visual and tactile inspection infeasible. Objective: The objective of this study was to evaluate the depth of proximal caries in the conventional and digitized radiographic examinations, comparing the depths of the lesions considered in these examinations to those of the histological examination. Method: Interproximal radiographic examinations of 40 human teeth, 20 premolars and 20 molars, with clinical alterations on one of the proximal surfaces, such as white or brown spot lesions and small cavitations, were used. Three professionals specialized in dental radiology with more than five years of clinical experience measured the depth of the lesions by radiographic examination of the samples. To obtain the results, we used the technique of analysis of variance (ANOVA). Results: A level of significance of 5% was found in conventional and digitized radiographic measurements, showing the fidelity of the radiographic images in relation to the actual depth of the lesion. Conclusion: It was concluded that the imaging tests evaluated were efficient in determining the depth of proximal caries lesions.

Maxillary Molar Root Canal Morphology Using Cone-Beam Computed Tomography: An Epidemiological Study from Shandong Province, China / Morfología del Conducto Radicular del Molar Maxilar Mediante Tomografía Computarizada de Haz Cónico: Un Estudio Epidemiológico de la Provincia de Shandong, China

SUMMARY: The objective of this study was to evaluate the maxillary molar root canal morphology in individuals from the Shandong province, China, using cone-beam computed tomography (CBCT) and classify it based on Ahmed et al. (2017) classification system to obtain a reference for clinical diagnosis and treatment. From December 2020 to June 2021, we screened CBCT data of 1,619 patients at the Jinan Stomatological Hospital who had been indicated for CBCT because of various oral abnormalities. The root and root canal morphologies of all teeth were statistically analyzed, and the root canal morphology was classified based on Ahmed et al. (2017) classification system. In the maxillary molars, three roots were the most common, accounting for 99.24 % and 74.61 % of all maxillary first and second molars, respectively. Two roots were the second most common, accounting for 0.66 % and 17.29 % of all maxillary first and second molars, respectively. Root morphology variation, e.g., fusion or furcation defect, was present in 22 (0.76 %) maxillary first molars and 765 (25.39 %) maxillary second molars, with the most common being mesiobuccal and distobuccal root fusion. Detection rates of a second mesiobuccal canal (MB2) in the maxillary first and second molars were 48.5 % and 26.5 %, respectively. Among age groups, the frequency of MB2 was the highest in the 15-24-year-old group and lowest in the 55-64-year-old group. Bilateral MB2 root canals were present in 64.8 % and 48.4 % of the maxillary first and second molars, respectively. Men and women accounted for 60.6 % and 67.8 % of the maxillary first molars, respectively, and 51.7 % and 45.6 % of the maxillary second molars, respectively. According to Ahmed et al. (2017) classification of root canal morphology, 18 and 22 root canal configurations were found in 1,453 right maxillary first molars and 1,444 left maxillary first molars, respectively. The right maxillary first molars showed three two-rooted, 14 three-rooted, and one four-rooted type. The left maxillary first molars showed two one-rooted, six two-rooted, and 14 three-rooted types. According to Ahmed et al. (2017) classification of root canal morphology, 43 and 45 root canal configurations were found in 1,507 right maxillary second molars and 1,506 left maxillary second molars, respectively. The right maxillary second molars showed 17 one-rooted, 16 two- rooted, eight three-rooted, and two four-rooted types. The left maxillary second molars showed 19 one-rooted, 13 two-rooted, 12 three- rooted, and one four-rooted type. This study showed that the maxillary molar root canal morphology is diverse in the Shandong province. Ahmed et al. (2017) classification system provides a clear description of the root canal morphology. CBCT can be used to study complex root and root canal morphologies.

El objetivo de este estudio fue evaluar la morfología del conducto radicular del molar superior en individuos de la provincia de Shandong, China, utilizando tomografía computarizada de haz cónico (CBCT) y clasificarla con base en el sistema de clasificación de Ahmed et al. (2017) para obtener una referencia para diagnóstico clínico y tratamiento. Desde diciembre de 2020 hasta junio de 2021, analizamos los datos de CBCT de 1619 pacientes en el Hospital Estomatológico de Jinan a quienes se les indicó CBCT debido a diversas anomalías orales. Las morfologías de la raíz y del conducto radicular de todos los dientes se analizaron estadísticamente, y la morfología del conducto radicular se clasificó según el sistema de clasificación de Ahmed et al. (2017). En los molares superiores, tres raíces fueron las más comunes, representando el 99,24 % y el 74,61 % de todos los primeros y segundos molares superiores, respectivamente. Dos raíces fueron las segundas más comunes, representando el 0,66 % y el 17,29 % de todos los primeros y segundos molares superiores, respectivamente. La variación de la morfología de la raíz, por ejemplo, fusión o defecto de furcación, estuvo presente en 22 (0,76 %) primeros molares superiores y 765 (25,39 %) segundos molares superiores, siendo la fusión radicular mesiovestibular y distovestibular la más común. Las tasas de detección de un segundo canal mesiovestibular (MB2) en los primeros y segundos molares superiores fueron del 48,5 % y 26,5 %, respectivamente. Entre los grupos de edad, la frecuencia de MB2 fue más alta en el grupo de 15 a 24 años y más baja en el grupo de 55 a 64 años. Los conductos radiculares MB2 bilaterales estaban presentes en el 64,8 % y el 48,4 % de los primeros y segundos molares superiores, respectivamente. En los hombres y en las mujeres representaron el 60,6 % y el 67,8 % de los primeros molares superiores, respectivamente, y el 51,7 % y el 45,6 % de los segundos molares superiores, respec- tivamente. Según la clasificación de la morfología del conducto radicular de Ahmed et al. (2017) se encontraron configuraciones de conducto radicular 18 y 22 en 1453 primeros molares superiores derechos y 1444 primeros molares superiores izquierdos, respectivamente. Los primeros molares superiores derechos mostraron tres tipos de dos raíces, 14 de tres raíces y uno de cuatro raíces. Los primeros molares superiores izquierdos mostraron dos tipos de una raíz, seis de dos raíces y 14 de tres raíces. Según la clasificación de la morfología del conducto radicular de Ahmed et al. (2017) se encontraron configuraciones de conducto radicular 43 y 45 en 1507 segundos molares superiores derechos y 1506 segundos molares superiores izquierdos, respectivamente. Los segundos molares superiores derechos mostraron 17 tipos de una raíz, 16 de dos raíces, ocho de tres raíces y dos de cuatro raíces. Los segundos molares superiores izquierdos mostraron 19 de una raíz, 13 de dos raíces, 12 de tres raíces y uno de cuatro raíces. Este estudio mostró que la morfología del conducto radicular del molar superior es diversa en la provincia de Shandong. El sistema de clasificación de Ahmed y colaboradores proporciona una descripción clara de la morfología del conducto radicular. CBCT se puede utilizar para estudiar morfologías complejas de raíces y conductos radiculares.

Descripción de la morfología del sistema de canales radiculares del primer molar maxilar mediante tomografía computarizada cone-beam en una población chilena / Description of the morphology of the root canal system of the maxillary first molar using cone-beam computed tomography in a Chilean population

Describir la morfología del sistema de canales radiculares del primer molar maxilar en una población chilena mediante exámenes de tomografía computarizada Cone-Beam (CBCT). Se realizó un estudio observacional descriptivo en el cual se utilizaron los exámenes CBCT de pacientes que fueron atendidos en un Centro de Radiología Maxilofacial privado durante el período comprendido entre Enero y Diciembre del año 2018 en la ciudad de Temuco, Chile, los cuales fueron observados de manera independiente por dos investigadores previamente calibrados. Se observaron 199 exámenes CBCT. En la raíz mesiobucal,predominaron las morfologías tipo II, I y IV de Vertucci respectivamente, mientras que en la raíz distobucal y palatina predominó la morfología tipo I. El canal MB2 estuvo presente en el 62,3 % de los casos, con una prevalencia significativamente mayor en pacientes jóvenes. En la mayoría de los primeros molares maxilares de los habitantes de la ciudad de Temuco se observaron tres raíces separadas y la presencia de cuatro canales. Se determinó una alta frecuencia del canal MB2 en la raíz MB.

SUMMARY: The objective of this study was to describe the morphology of the root canal system of the maxillary first molar in a Chilean population through Cone-Beam computed tomography (CBCT) examinations. A descriptive observational study was carried out in which the CBCT examinations of patients who were treated in a private maxillofacial radiology center during the period between January and December 2018 in Temuco, Chile, were used which were observed independently by two previously calibrated researchers. In this analysis 199 CBCT exams were observed. In the mesiobuccal root, Type II, I and IV morphologies predominated respectively, while in the distobuccal and palatal root, Type I morphology predominated. The MB2 canal was present in 62.3 % of cases, with a higher prevalence in young patients. Three separate roots and the presence of four canals were observed in most of the maxillary first molars of the patients in Temuco. A high frequency of the MB2 canal was determined in the root MB.

Root resorption pattern in panoramic radiographs of pediatric patients with unilateral posterior crossbite: a cross-sectional and retrospective study / Patrón de reabsorción radicular en radiografías panorámicas de pacientes pediátricos con mordida cruzada posterior unilateral: estudio transversal y retrospectivo

SUMMARY: temporary mandibular molars in panoramic radiographs of pediatric patients with unilateral posterior crossbite (UPCB). This cross-sectional and retrospective study analyzed 114 orthopantomograms of patients between 6 - 9 years of age with unilateral posterior crossbite diagnosis. The first and second mandibular molars were analyzed. Their root resorption stage was typified, and the root lengths were measured; to later compare the data obtained depending on the malocclusion side. 86.4 % of molars showed a linear resorption pattern, and atypical resorption prevalence in patients with UPCB was 13.5 %. The total length average of the first molars on the side of the malocclusion was 8.20 mm, while the contralateral exhibited a mean of 9.29 mm. Lastly, the second molars had a mean length of 11.12 mm in crossbite side and 12.30 mm in the normal occlusion side. UPCB could affect physiological resorption by observing a resorption alteration in those mandibular molars located on the malocclusion side.

RESUMEN: El trabajo de este estudio se realizó en molares mandibulares temporales en radiografías panorámicas de pacientes pediátricos con mordida cruzada posterior unilateral (MCPU). Este estudio transversal y retrospectivo analizó 114 ortopantomografías de pacientes entre 6 - 9 años de edad con diagnóstico de mordida cruzada posterior unilateral. Se analizaron los primeros y segundos molares mandibulares. Se tipificó su estado de reabsorción radicular y se midió la longitud de las raíces; para luego comparar los datos obtenidos según el lado de la maloclusión. El 86,4 % de los molares mostró un patrón de reabsorción lineal y la prevalencia de reabsorción atípica en pacientes con MCPU fue del 13,5 %. El promedio de longitud total de los primeros molares del lado de la maloclusión fue de 8,20 mm, mientras que el contralateral exhibió una media de 9,29 mm. Por último, los segundos molares tenían una longitud media de 11,12 mm en el lado de mordida cruzada y de 12,30 mm en el lado de oclusión normal. La MCPU podría afectar la reabsorción fisiológica al observar una alteración de la reabsorción en aquellos molares mandibulares ubicados en el lado de la maloclusión.

Prevalence of radix entomolaris in mandibular first molars by cone-beam computed tomography in a southern Chilean sub-population / Prevalencia de radix entomolaris en primeros molares mandibulares usando tomografía computarizada cone-beam en una subpoblación del sur de Chile

SUMMARY: The aim of this of this study was to evaluate the prevalence and morphology of radix entomolaris (RE) in the mandibular first molar (MFM) in a southern Chilean sub-population by cone-beam computed tomography (CBCT). Two hundred ten CBCT images of MFM were analysed. To detect the presence of RE, the observation and measurements were standardised, advancing 1 mm to apical from the floor of the pulp chamber to the most apical zone of the tooth. The data were analyzed using descriptive statistics, with a value of P < 0.05 being statistically significant. The prevalence of a third root in the permanent MFM was 5.7 % (12/210). The incidence of RE was the same in male patients (2.9 %) as in female patients (2.9 %) (p=0.324). The occurrence of an RE in the left MFM was 7.3 % (3/41 patients) for male patients and 4.5 % (3/66) for female patients (p=0.398). The right MFM in male patients had an incidence of 8.1 % (3/37) and 4.5 % (3/66) for female patients (p=0.340). When the presence of an RE was compared between the left (5.6 %) and right side (5.8 %), no statistically significant differences were found (p=0.998). The frequency of bilateral three-rooted MFM was 71.43 % (5/7) and 28.57 % (2/7) were unilateral. The prevalence of RE in MFM in a southern Chilean sub-population was 5.7 %. The occurrence was bilateral in the majority of cases and no significant differences were observed by sex or side. The commonest type of RE was Type 1 (83.3 %). The use of CBCT can improve the endodontic treatment outcome.

RESUMEN: El objetivo de este estudio fue evaluar la prevalencia y morfología de radix entomolaris (RE) en el primer mo- lar mandibular (MFM) en una subpoblación del sur de Chile mediante tomografía computarizada de haz cónico (CBCT). Se analizaron doscientas diez imágenes CBCT de MFM. Para detectar la presencia de OD se estandarizó la observación y las medidas, avanzando 1 mm apical desde el suelo de la cámara pulpar hasta la zona más apical del diente. Los datos fueron analizados mediante estadística descriptiva, siendo estadísticamente significativo un valor de P < 0,05. La prevalencia de una tercera raíz en el MFM permanente fue de 5,7 % (12/210). La incidencia de ER fue la misma en pacientes masculinos (2,9 %) que en pacientes femeninas (2,9 %) (p=0,324). La aparición de un ER en el MFM izquier- do fue del 7,3 % (3/41 pacientes) para los pacientes masculinos y del 4,5 % (3/66) para las pacientes femeninas (p=0,398). El MFM derecho en pacientes masculinos tuvo una incidencia de 8,1 % (3/ 37) y 4,5 % (3/66) para pacientes femeninos (p=0,340). Cuando se comparó la presencia de un OD entre el lado izquierdo (5,6 %) y derecho (5,8 %), no se encontraron diferencias estadísticamente significativas (p=0,998). La frecuencia de MFM de tres raíces bilaterales fue 71,43 % (5/7) y 28,57 % (2/7) fueron unilaterales. La prevalencia de RE en MFM en una subpoblación del sur de Chile fue de 5,7 %. La presentación fue bilateral en la mayoría de los casos y no se observaron diferencias significativas por sexo o lado. El tipo de ER más frecuente fue el tipo 1 (83,3 %). El uso de CBCT puede mejorar el resultado del tratamiento endodóntico.

Bilaterality and symmetry of c-shaped mandibular second molars in a Mexican Maya and non-Maya population: a CBCT in vivo study / Bilateralidad y simetría de los segundos molares mandibulares en forma de c en una población mexicana Maya y no Maya: estudio in vivo mediante CBCT

SUMMARY: The objective of this study was to evaluate the bilaterality and symmetry in C-shaped mandibular second molars in Mexican Maya and non-Maya populations using cone-beam computed tomography (CBCT). Five-hundred-twenty-five CBCT scans of patients with left and right mandibular second molars were analyzed to determine the prevalence and bilaterality. The teeth were assessed for the presence of C-shaped root canals, according to Fan et al. (2004) criteria. The sample was subdivided by ethnicity, sex, unilateral/bilateral presence, side of the longitudinal groove, and the C-shaped root canal configuration and symmetry, at the cervical, middle, and apical cross- sections of the root. C-shaped mandibular second molars were present in 24.95% of the individuals. Most (60.30%) of those showing this trait had it bilaterally. When comparing by ethnicity, sex, and side, we detected no significant differences. The vast majority (97.33%) presented the groove along the lingual side. The C3 was the most prevalent configuration in the overall sample, while in the Maya group, the C1 was the most common configuration. When analyzed by sex and ethnic group, the non-Maya females tended to deviate from the other groups in terms of bilaterality. Overall, 55.70% of bilateral C-shaped mandibular second molars were also symmetric in the three radicular thirds. The prevalence of C-shaped mandibular second molars was similar to that reported for northernAsian populations, which is consistent with the evolutionary origins of Native American populations. Most of the sample showed bilaterality and half were symmetric. Clinicians must be aware of the ethnic background of their patients and consider the possible variations to do more predictable root canal treatments.

RESUMEN: El objetivo de este estudio fue evaluar la bilateralidad y simetría de los segundos molares mandibulares en forma de C en una población Mexicana Maya y no-Maya mediante tomografía computarizada de haz cónico (CBCT). Material and Métodos: Se analizaron quinientos veinticinco tomografías de pacientes con segundos molares mandibularesderecho e izquierdo para determinar la prevalencia y bilateralidad. Los dientes fueron evaluados según la presencia de conductos en forma de C de acuerdo a los criterios de Fan et al. La muestra fue subdividida por etnicidad, sexo, presencia bilateral/unilateral, lado del surco y configuración y simetría de los conductos en los cortes transversales cervical, medio y apical. Los segundos molares mandibulares en forma de C estuvieron presentes en el 24.95 % de los individuos. La mayoría (60.30%) de los que mostraron este rasgo lo hicieron de forma bilateral. El comparar por etnicidad, sexo y lado, no se encontraron diferencias estadísticamente significativas. La gran mayoría (97.33%) presentó el surco por lingual. C3 fue la configuración más prevalente en la muestra general, mientras que en el grupo Maya el C1 fue la más común. El análisis por sexo y grupo étnico arrojó que las mujeres no Mayas tendieron a desviarse de los otros grupos en términos de bilateralidad. El 55.70% de los segundos molares mandibulares bilaterales fueron simétricos en sus tres tercios radiculares. La prevalencia de los segundos molars mandibulares en forma de C fue similar a la reportada para las poblaciones del norte de Asia, lo cual es consistente con los orígenes evolutivos de las poblaciones nativas americanas. La mayor parte de la muestra presentó el rasgo de forma bilateral y la mitad de éstos fueron simétricos. Los odontólogos deben tomar en cuenta el origen étnico de sus pacientes y considerar las posibles variaciones para realizar tratamientos endodónticos más predecibles.

Micro-CT evaluation of maxillary first molars: interorifice distances and internal anatomy of the mesiobuccal root

Abstract: This study aimed to describe the morphometric relationship of root canal orifices on the pulp floor in the presence/absence of mesiobuccal second canal (MB2) in the maxillary first molars and other aspects of its internal anatomy. Sixty-two maxillary first molars were scanned by micro-CT. The presence of the MB2 canal was verified. The distance between the center points of the MB1, MB2, distobuccal (DB), and palatal (P) canal orifices on the pulp floor were measured (MB1-MB2, MB1-DB, MB2-DB, MB1-P, and DB-P). The MB1-P to DB-P ratio was calculated. The distances between the anatomic apex and the MB1 and MB2 apical foramina were measured. The length of the band-shaped isthmus was also measured. Student's t-test was applied to verify the association between the presence of an MB2 canal, the interorifice distances, and the ratio of the MB1-P to DB-P distance (α = 5%). The MB2 canal was present in 43 roots (69.35%). Statistics showed significant differences when MB2 was present for the largest MB1-P distance (p < 0.05) and higher values for the MB1-P to DB-P ratio (p < 0.05). A band-shaped isthmus was detected in 25.8% of MB roots. The mean distance from the apical foramen to the isthmus floor ranged from 1.74 for MB1 canals to 1.42 for MB2 canals. Canal orifice distances on the pulp floor may predict the presence of MB2 canals. There was a high incidence of isthmus, accessory canals, and apical delta in the critical apical zone in MB roots of maxillary first molars.

Evaluation of type of kinematics on glide path procedures and torsional fatigue resistance after preparation of moderately curved canals

Abstract: Sixty moderately curved canals of mandibular molars classified as Vertucci's type IV canal configuration were selected by micro-CT 1174. The teeth were divided into two groups according to the kinematics used, whether reciprocating or rotary motion (n=30, totaling 60 mesial root canals). The instruments used to perform the glide path procedures had identical features (0.15 mm of tip size, 0.04 mm/mm taper, thermal treatment, and square cross-section), but differed in the direction of the cutting blade. The duration of the procedure and the absolute and percentage frequency of the instruments to reach the full working length were recorded. The torsional test (3630-1; 1992) was performed on both used and unused instruments, to evaluate a possible reduction in the torsional resistance when using the glide path procedure. Statistical analysis was performed using the unpaired t-test and the chi-square test, and the level of significance was set at 5%. The type of kinematics used affected the duration of glide path procedures, and the reciprocating motion seemed to induce less torsional stress during glide path procedures.

Cephalometric evaluation of changes in vertical dimension and molar position in adult non-extraction treatment with clear aligners and traditional fixed appliances

ABSTRACT Introduction: Orthodontists have been using clear aligners to treat malocclusions, and one potential effect of treatment with orthodontic aligners is the intrusion and/or resists extrusion of the posterior teeth. This "bite-block effect" is primarily anecdotal due to the frequent occurrence of posterior open bites in patients after clear aligner therapy. Objective: The purpose of this study was to compare changes promoted by clear aligners and traditional fixed appliances in cephalometric measurements of the vertical dimension and molar position in adult patients with Class I malocclusion treated with non-extraction. Methods: Pre- and post-treatment lateral cephalometric radiographs of adult patients treated with either clear aligners (n=44) or traditional fixed appliances (n=22) were selected for retrospective analysis. Eight interval measurements and one nominal measurement were evaluated: anterior overbite (OB), mandibular plane angle related to cranial base (SN_MP) and related to Frankfort (FMA), lower molar height (L6H) and upper molar height (U6H), palatal plane to mandibular plane angle (PP_MP), lower facial height (LFH), total facial height (TFH), and posterior open bite (Posterior_OB). A single evaluator traced all cephalographs, and changes in select measures of the vertical dimension were compared within and between groups. Results: OB decreased (1.15 mm) and L6H increased (0.63 mm) in the traditional fixed appliance group. Mandibular plane angles (related to cranial base and to Frankfort) increased (0.43° and 0.53°, respectively) in the clear aligner group, but just FMA showed significant difference between groups (difference of 0.53°). LFH and TFH increased (ranging from 0.52 mm to 0.80 mm) in both groups, with no differences between treatment modality. Presence of visible posterior open bite significantly increased over the course of treatment. OB, FMA and L6H exhibited an interaction between treatment stage (pre- and post-treatment) and modality (clear aligner therapy and traditional fixed appliances), but no interaction among these three variables was found. Conclusions: The evidence does not support the theory that clear aligner therapy produces better vertical dimension control than traditional fixed appliances. Traditional fixed appliance therapy slightly extruded the lower molar, and clear aligner therapy produced a slightly mandibular backward rotation.

RESUMO Introdução: Ortodontistas têm usado os alinhadores transparentes para tratar más oclusões, e um potencial efeito desse tratamento é a intrusão e/ou resistência à extrusão dos dentes posteriores. Esse efeito de "bloco de mordida" é principalmente empírico, devido à ocorrência frequente de mordidas abertas posteriores em pacientes após a terapia com alinhadores transparentes. Objetivo: O objetivo do presente estudo foi comparar as mudanças promovidas pelos alinhadores transparentes e aparelho fixo convencional nas medidas cefalométricas de dimensão vertical e posição do molar em pacientes adultos com má oclusão de Classe I tratados sem exodontias. Métodos: Radiografias cefalométricas laterais pré- e pós-tratamento de pacientes adultos tratados com alinhadores transparentes (n=44) ou com aparelho fixo tradicional (n=22) foram selecionadas para uma análise retrospectiva. Oito medidas de intervalo e uma medida nominal foram avaliadas: trespasse vertical anterior (OB), ângulo do plano mandibular em relação à base do crânio (SN_MP) e em relação ao Plano de Frankfurt (FMA), altura do molar inferior (L6H) e altura do molar superior (U6H), ângulo do plano palatal ao plano mandibular (PP_MP), altura facial inferior (LFH), altura facial total (TFH) e mordida aberta posterior (Posterior_OB). Um único avaliador fez todos os traçados cefalométricos, e as mudanças nas medidas da dimensão vertical foram comparadas intra e intergrupos. Resultados: OB reduziu (1,15 mm) e L6H aumentou (0,63 mm) no grupo de aparelho fixo tradicional. Os ângulos do plano mandibular (em relação à base do crânio e ao plano de Frankfurt) aumentaram (0,43° e 0,53°, respectivamente). No grupo dos alinhadores invisíveis, apenas o FMA apresentou diferença significativa entre os grupos (diferença de 0,53º). LFH e TFH aumentaram (variando de 0,52 mm a 0,80 mm) em ambos os grupos, sem diferenças entre as modalidades de tratamento. A presença de uma mordida aberta posterior visível aumentou significativamente durante o curso do tratamento. OB, FMA e L6H exibiram interação entre o estágio do tratamento (pré- e pós-tratamento) e a modalidade (terapia com alinhadores invisíveis ou aparelho fixo tradicional), porém não foi encontrada interação entre essas três variáveis. Conclusões: A evidência não suporta a teoria de que a terapia com alinhadores invisíveis produz melhor controle da dimensão vertical do que o aparelho fixo. O tratamento com aparelhagem fixa extruiu ligeiramente o molar inferior, e o tratamento com alinhadores invisíveis produziu uma ligeira rotação posterior da mandíbula.

Influence of voxel size on micro-CT analysis of debris after root canal preparation

Abstract: The aim of this study was to assess the influence of micro-computed tomography (micro-CT) voxel size on the evaluation of debris accumulation after passive ultrasonic irrigation (PUI) in curved root canals prepared with rotary nickel-titanium files. Mesial root canals (n = 24) of mandibular molars with curvature between 25° and 35° were prepared using ProDesign Logic 30/.05 (PDL) or HyFlex EDM 25/.08 (HEDM). PUI was performed after root canal preparation of all root canals. The specimens were scanned using high-resolution (5 μm voxel size) micro-CT imaging before and after experimental procedures. The percentage of debris was analyzed in the middle and apical thirds using images with 5, 10 and 20 μm voxel sizes. Data were compared using unpaired and paired Student's t-test, ANOVA and Tukey's statistical tests (α = 0.05). There were no differences among the debris analyses performed at different voxel sizes (5, 10 and 20 μm) (p > 0.05). The percentage of debris was similar between the root canals prepared by PDL and HEDM before and after PUI (p > 0.05). In both groups, the percentage of debris decreased in the middle third after PUI (p < 0.05). Within the limitations of this ex vivo study, it can be concluded that the voxel sizes evaluated did not have a significant impact on the analysis of accumulated debris. However, the results showed a tendency for detection of more debris in the analysis performed using a lower voxel size. PUI decreased the debris accumulation in the middle third of curved root canals.

Impact of Early Loss of Lower First Permanent Molars on Third Molar Development and Position

ABSTRACT Objective: To evaluate the effects of unilateral loss of the lower first permanent molar (L6) on the position and development of the lower third molar (L8). Material and Methods: Fifty-four panoramic radiographs of subjects with unilateral loss of L6 were examined. The L8 on the side of the L6 loss was compared with the L8 in the hemiarch without L6 loss (contralateral). The effect of L6 loss on the positioning of L8 was examined in all the samples (n=54), whereas the effect on the development of the third molar was examined in 38 patients with L8 with incomplete root formation. The Signs statistical test was used to evaluate the comparison between loss and contralateral hemiarches. Results: In 20 (37%) of 54 subjects, the L8 was better positioned in the hemiarch with loss of the lower first molar (p<0.001) compared with the control side. In the remaining 34 subjects, no difference was found. When only the L8 considered as impacted on the control side was examined (n=30), the cases with better positioning on the side with L6 loss increased to 66.6% (p<0.001). Conclusion: The loss of lower first molars improves the position of the lower third molar during its active eruption, mainly when the lower third molar is impacted. However, L6 loss does not affect the root development of lower third molars.

Three Dimensional mapping of the root apex: distances between apexes and anatomical structures and external cortical plates

Abstract This study aimed to determine the mean distances between apexes of the maxillary posterior teeth and the maxillary sinus, between apexes of the mandibular posterior teeth and the mandibular canal, and between the root apexes of all teeth and the adjacent cortical plates. A total of 800 cone-beam computed tomography (CBCT) scans (400 maxillary and 400 mandibular) were obtained from patients indicated for several treatments. The proximity between apexes and anatomical structures, and the relationship between apexes and adjacent cortical plates were assessed together with the risk of over-instrumentation. Paired-sample comparisons were performed by using the paired t-test. The means were compared by ANOVA, Kruskal-Wallis and Dwass-Steel-Critchlow-Fligner tests. a) Most of the apexes classified as A (high-risk proximity) were observed in maxillary first and second molars, in mandibular first and second molars, and in second premolars in relation to near anatomical structures. b) A predominance of class A (86.42%) was noticed in the first premolars, between apexes of maxillary teeth and adjacent cortical plates. c) The distance between apexes of mandibular teeth and buccal cortical plates showed a predominance of medium-risk proximity (B) in all the groups, except the first premolars, with the highest risk (82.22%), and the second molars, with low-risk proximity (C) to distal and mesiobuccal apexes (91.77% and 89.62%). CBCT images are important for endodontic diagnosis and treatment, since many teeth have high risk proximity to near anatomical structures and adjacent cortical plates.

Methodological considerations for a model of endodontic treatment in Wistar rats / Consideraciones metodológicas para el modelo de tratamiento endodóntico en ratas Wistar

ABSTRACT The use of correctly designed animal models is a fundamental step prior to clinical trials in humans. Although rats are easy to house and handle, and have molars that resemble those of humans, very few researchers use them as a model for root canal treatment, probably due to their small size and the lack of relevant data necessary to reproduce the model. Our aims were to describe the anatomic and histologic characteristics of the mandibular first molar of the Wistar rat and present a standardised model for its experimental endodontic treatment. Twenty female rats were used. The characteristics of the mesial and distal roots were described histologically and the quality of the results achieved following the treatment protocol presented herein was assessed by means of digital radiographs, micro-CT and histological sections. The age of 55 days was found to be the most adequate for performing this technique, but we consider the interval of 50 to 60 days to be suitable. Both canals are oval, although in opposite planes, and the furcating-facing walls present the minimum dentine thickness. It was essential to become familiar with these aspects in order to decide upon the most appropriate instrumentation and obturation techniques that would enable replication of this model in basic science research.

RESUMEN El uso de modelos animales correctamente diseñados es un paso fundamental previo al desarrollo de ensayos clínicos en humanos. A pesar de resultar fáciles de criar y manipular y de poseer molares que se asemejan a los humanos, muy pocos grupos utilizan a la rata como modelo experimental para el tratamiento endodóntico probablemente debido a su pequeño tamaño y a la escasa información disponible para poder aplicar los modelos existentes. Nuestros objetivos fueron describir las características anatómicas e histológicas del primer molar inferior de la rata Wistar y presentar un modelo estandarizado para el tratamiento endodóntico experimental de esta pieza. Se utilizaron 20 ratas hembra. Las características de las raíces mesial y distal fueron descritas histológicamente y los resultados obtenidos fueron evaluados mediante radiografías digitales, microCTy cortes histológicos. La edad de 55 días demostró ser la más adecuada para ejecutar la técnica, pero consideramos que el intervalo de 50 a 60 días puede resultar apropiado. Se observó que ambos canales presentan una morfología oval, aunque en direcciones opuestas, y que las paredes furcales resultaron ser las que presentan el menor espesor de dentina. Familiarizarse con estos aspectos de la anatomía e histología del molar de la rata resultó fundamental para decidir sobre las técnicas de preparación y obturación más apropiadas que permitieran la replicación de este modelo en el campo de las ciencias básicas.

Clinical and radiographic examination compared to microscopic examination in the detection of anatomical features of mesiobuccal canals in maxillary first molars: a diagnostic study / Comparación entre examen radiológico y clínico con examen microscópico en la detección de características anatómicas de los canales mesiobucales en los primeros molares maxilares: un estudio diagnóstico

SUMMARY: The aim of the present study was to determine the accuracy, sensitivity, and specificity of the clinical and radiographic examination (CRE) method compared to the examination with the dental operating microscope (DOM) on the detection of anatomical features of mesiobuccal canals in maxillary first molars. One hundred maxillary first molars were selected to assess the number of canals orifice entrances, accessibility, and ending of their mesiobuccal canals using the CRE method and the examination with the DOM. The diagnostic tests of the CRE exhibited, in general, high levels of accuracy, sensitivity, and specificity. However, low levels of these outcomes occurred, mainly, on the detection of the number of canals entrance orifices of the mesiobuccal root. The statistically significant differences (p<0.05) occurred for accessibility and ending of canals in 61 of the 62 cases (out of 100) when two of them were present: 2 accessible root canals (48 cases; 77.42 %), and 1 accessible and 1 inaccessible canals (13 cases; 20.97 %); 1 foramen after fusion (18 cases; 29.03 %), 2 foramens (30 cases; 48.39 %), and 1 foramen and 1 blind foramen (13 cases; 20.97 %). This study proves that the clinical and radiographic method (still the most commonly used worldwide) can't be trusted absolutely in situations of complex internal anatomy regarding the mesiobuccal root canals of maxillary first molars.

RESUMEN: El objetivo del presente estudio fue determinar la precisión, sensibilidad y especificidad del método de examen clínico y radiográfico (ECR) en comparación al examen con el microscopio quirúrgico dental (MQD) en la detección de características anatómicas de los canales mesiovestibulares en primeros molares maxilares.Se seleccionaron 100 primeros molares maxilares para evaluar el número de entradas de los canales, la accesibilidad y la terminación de sus canales mesiovestibulares utilizando el método ECR y el examen con el MQD.Las pruebas de diagnóstico del ECR exhibieron, en general, altos niveles de precisión, sensibilidad y especificidad. Sin embargo, también hubo niveles bajos de estos resultados, principalmente, en la detección del número de orificios de entrada a los canales de las raíces mesiovestibulares. Hubo diferencias estadísticamente significativas (p<0,05) para la accesibilidad y terminación de los canales en 61 de los 62 casos (del total de 100), cuando dos de ellos estaban presentes: 2 canales radiculares accesibles (48 casos, 77,42 %), y 1 accesible y 1 inaccesible (13 casos, 20,97 %). Después de la fusión, un orificio (18 casos, 29,03 %), 2 orificios (30 casos, 48,39 %) y 1 orificio más otro, ciego (13 casos, 20,97 %). Este estudio demuestra que no se puede confiar plenamente en el método clínico y radiográfico (todavía el más utilizado en todo el mundo), cuando existe una anatomía interna compleja de los canales de la raíz mesiovestibular de los primeros molares superiores.

Comparison of the diagnostic accuracy of cone beam computed tomography and three intraoral radiographic systems in the diagnosis of carious lesions in vitro / Comparación de la precisión diagnóstica de la tomografía computarizada de haz cónico y tres sistemas radiográficos intraorales en la detección de lesiones de caries in vitro

Objective: The objective of the study was to compare the diagnostic accuracy of cone beam computed tomography and three intraoral radiographic systems in the detection of in vitro caries lesions. Material and Methods: One hundred teeth (46 molars and 54 premolars) were evaluated, including 176 proximal surfaces and 90 occlusal surfaces, with or without dental caries lesions. Digital images of all teeth were obtained using specific intraoral radiographs, VistaScan DürrDental®phosphor-plate radiography, XIOS XG Sirona® digital sensor radiography, and CBCT I-CATTM. Observers evaluated the images for the detection of caries lesions. The teeth were clinically sectioned and stereomicroscopy served as a validation tool. The relationship of sensitivity and specificity between all systems was determined through the ROC curve using Az values. Results: The values of the area under the curve (Az) selected for the CBCT I-CATTM system were 0.89 (0.84-0.93), for conventional radiography 0.71 (0.66-0.76), digital sensor radiography 0.74 (0.70-0.78) and digital radiography with phosphor-plates 0.73 (0.69-0.77). Statistically significant differences were found between the CBCT I-CATTM system and intraoral radiographic systems (p<0.01). The sensitivity and specificity values for the CBCT I-CATTM were 0.84 and 0.93 respectively. Conclusion: CBCT has a high sensitivity and specificity compared to intraoral radiographic systems for the diagnosis of dental caries lesions in vitro.

Objetivo: El objetivo del estudio fue comparar la precisión diagnóstica de la tomografía computarizada de haz cónico y tres sistemas radiográficos intraorales en la detección de lesiones de caries in vitro. Material y Métodos: Se evaluaron 100 dientes, 46 molares y 54 premolares; 176 superficies proximales y 90 superficies oclusales, con o sin lesión de caries dental. Se obtuvieron imágenes digitales de todos los dientes utilizando radiografías intraorales convencionales, radiografía con placas de fósforo VistaScan DürrDental®, radiografía con sensor digital XIOS XG Sirona® y CBCT I- C ATTM. Tres observadores evaluaron las imágenes para la detección de lesiones de caries. Los dientes se seccionaron clínicamente y la estereomicroscopía sirvió como herramienta de validación. Se determinó relación de sensibilidad y especificidad entre todos los sistemas a través de la curva ROC utilizando valores Az. Resultados: Los valores de área debajo de la curva (Az) obtenidos para el sistema CBCT I-CATTM fueron de 0.89 (0.84-0.93), para radiografía convencional 0.71 (0.66-0.76), radiografía con sensor digital 0.74 (0.70-0.78) y radiografía digital con placas de fósforo 0.73 (0.69-0.77). Se encontró diferencias estadísticamente significativas entre el sistema CBCT I-CATTM y todos los sistemas radiográficos convencionales y digitales (p<0.01). Los valores de sensibilidad y especificidad para el CBCT I-CATTM fueron 0.84 y 0.93 respectivamente. Conclusión: La CBCT tiene una alta sensibilidad y especificidad en comparación a los sistemas radiográficos intraorales en el diagnóstico de lesiones de caries dental in vitro.

Radiographic Diagnosis of Simulated External Root Resorption in Multi-Rooted Teeth: The Influence of Spatial Resolution / Diagnóstico radiográfico de reabsorção externa simulada em dentes multiradiculares: influência da resolução especial

ABSTRACT The aim of this study was to evaluate the influence of spatial resolution (line pairs per millimetre - lp/mm) on the diagnosis of simulated external root resorption (ERR) in multirooted teeth by using digital periapical radiography. Forty human mandibular molars (80 roots) were used. The roots were divided into the following groups (n = 10): control without root filling (WORF), control with root filling (WRF), small ERRWORF, small ERRWRF, moderate ERRWORF, moderate ERRWRF, extensive ERRWORF and extensive ERRWRF. Four digital radiographs (phosphor storage plates - PSP system) were taken of each tooth in three angulations. The PSPs were scanned with 10, 20, 25 and 40 lp/mm. All images were assessed by three endodontists who used a fivepoint scale for presence and absence of ERR and classified its location (cervical, middle or apical third). ROC curves and oneway ANOVA were performed (p < 0.01). Diagnosis of ERR in nonrootfilled teeth showed higher values of sensitivity for 20 lp/mm and higher values of both specificity and accuracy for 40 lp/mm. In rootfilled teeth, sensitivity and accuracy were higher for 25 lp/mm and spatial resolution had no influence on specificity. The best resolution for diagnosis of small and extensive ERR was 25 lp/mm, whereas for moderate ERR, it was 40 lp/mm. Cervical ERR was the most difficult to diagnose, regardless of the spatial resolution. Higher spatial resolutions have improved the radiographic diagnosis of simulated ERR in multirooted teeth and this should be considered when performing digital radiographs.

RESUMO O objetivo deste estudo foi avaliar a influência do número de pares de linhas em radiografia intraoral digital, na precisão da detecção de reabsorção radicular externa. Quarenta molares inferiores (n=80 raízes) foram submetidos ao preparo químico mecânico e em então, metade da amostra foi obturada. Em seguida, as raízes dos dentes foram aleatoriamente divididas de acordo com o tamanho da reabsorção radicular a ser simulada e com a presença e ausência de tratamento endodôntico. As RRE foram realizadas com brocas esféricas diamantadas de tamanhos 1/2, 1, 2. Executouse radiografias digitais por meio do sistema de aquisição semidireto com a utilização de placas de fósforo fotoestimuladas (PSP). Em cada dente, incidências orto, mésio e distorradial foram repetidas quatro vezes, para que pudessem ser digitalizadas com resoluções de 10, 20, 25, 40 pl/mm. Após análise, verificouse que dentes obturados apresentaram menores valores de sensibilidade com 10, 20 e 25 pl/mm e maiores valores de especificidade e acurácia para as mesmas resoluções. Dentes sem obturação registraram maiores valores de sensibilidade para resolução 20 e menor para 40; no entanto, a especificidade e a acurácia, foram maiores com 40 e menores em 10. Em RRE pequena, as resoluções 10 e 25 pl/mm foram respecti vamente menos e mais acuradas; RRE média, foi maior com 40 pl/mm e RRE grandes foram melhores identificadas com 25. Correlacionando acertos no diagnóstico com localização das RRE, verificouse que o terço cervical apresentouse menos detectável. Concluiuse que resolução espacial influenciou a detecção de RRE simuladas em radiografias periapicais digitais.

Instrumentação reciprocante em canal mésiovestibular de molar superior após fratura de lima endodôntica: relato de caso / Reciprocal instrumentation in the mesiobuccal canal of the upper molar after endodontic file fracture: case report

Objetivo: reportar um caso clínico de ultrapassagem de instrumento endodôntico fraturado em terço médio de canal mésiovestibular de molar superior permanente, utilizando a técnica de instrumentação reciprocante associada à instrumentação convencional manual e ao gel de E.D.T.A. 24%. Relato de caso: paciente do sexo masculino, 24 anos, normossistêmico, compareceu ao consultório odontológico privado com queixa de dor espontânea e encaminhamento para tratamento endodôntico do dente 17. O diagnóstico foi pulpite irreversível sintomática com indicação de tratamento endodôntico primário. A lima principal escolhida foi a Reciproc® R25 M-wire (VDW), que, durante a instrumentação do canal mésiovestibular, sofreu fratura por torção em terço médio, inviabilizando a continuação em direção apical. Considerações finais: a associação da técnica convencional manual das limas Hedströen com a técnica reciprocante de corte reverso da lima Wave One® Gold Primary e o uso do gel de E.D.T.A. 24% permitiram ultrapassagem do fragmento de lima fraturado em terço médio do canal mésiovestibular do dente 17, promovendo selamento hermético, limpeza, modelagem e obturação satisfatórias.(AU)

Objective: to report a clinical case of a fractured endodontic instrument in the middle third of the permanent maxillary molar maxillary canal using the technique instrumentation reciprocation with technique to conventional manual instrumentation and the E.D.T.A. 24% gel. Case report: a 24-yearold normosystemic male patient came to the private dental office complaining of spontaneous pain and referred for endodontic treatment of tooth 17. The diagnosis was irreversible symptomatic pulpitis with indication for primary endodontic treatment. The main file chosen was the Reciproc® R25 M-wire (VDW), which during the instrumentation of the mesiobuccal canal suffered torsional fracture in the middle third, preventing continuity in the apical direction. Final considerations: the association of the conventional manual Hedströen file technique with the reciprocal reverse cutting technique of the Wave One® Gold Primary file and the use of E.D.T.A. 24% gel allowed the fractured file fragment to be overcome in the middle third of the mesiobuccal canal of tooth 17, promoting hermetic sealing, cleaning, modeling and satisfactory filling. (AU)